Page 15 - Aluminum_Machining_catalog_2023
P. 15
50° 70°MAX
VNMG/VNGG-NF 35° 93° MAX 93º
50°
Double-Sided 35° Rhombic 72.5º MAX
Inserts for Semi-Finishing IC
and Finishing Applications ISOTURN
RE L S
Dimensions Tough 1 Hard Recommended Machining Data
IC10 IC20 ap f
Designation L IC S RE (mm) (mm/rev)
VNMG 12T302-NF 12.40 7.15 3.97 0.20 • 0.40-2.50 0.07-0.18
VNMG 12T304-NF 12.40 7.15 3.97 0.40 • 0.70-2.00 0.07-0.24
VNMG 12T308-NF 12.40 7.15 3.97 0.80 • 1.00-3.00 0.08-0.24
VNMG 160408-NF 16.60 9.52 4.76 0.80 • 1.00-3.00 0.08-0.25
• For user guide and cutting speed recommendations, see pages 4-6,26
50° 70°MAX 93º
VNMS-12 35° 93° MAX 50°
35° Rhombic Single-Sided 72.5º MAX
Inserts for Soft and IC
Nonferrous Materials
RE L S
Dimensions Recommended Machining Data
f
ap
Designation L IC S RE IC20 (mm) (mm/rev)
VNMS 160404-12 16.60 9.52 4.76 0.40 • 1.00-3.00 0.07-0.30
VNMS 160408-12 16.60 9.52 4.76 0.80 • 1.00-3.50 0.07-0.33
• For user guide and cutting speed recommendations, see pages 4-6,26
70°MAX 107.5º
35° 72.5º 35º 107.5º
MAX
VNGU-R3N IC
Double-Sided Sharp Edged
Positive Rake Inserts for Rough RE L S
Machining Aluminum and
Other Non-Ferrous Materials
Dimensions Recommended Machining Data
IC20 ap f
Designation L IC S RE (mm) (mm/rev)
VNGU 220612-R3N 22.00 12.70 6.77 1.20 • 1.00-4.50 0.10-0.30
VNGU 220616-R3N 22.00 12.70 6.51 1.60 • 1.50-4.50 0.10-0.35
VNGU 220630-R3N 22.00 12.70 6.35 3.00 • 1.50-4.50 0.15-0.40
• For user guide and cutting speed recommendations, see pages 4-6,26
Scan the QR code for additional information.
Enter the item description in the search field to access additional related data. 13