Select Region

MILLING
NPA 24/2021 INCH


The Expansion of the HELI3MILL 390 LINE with a New Serrated Cutting Edge Insert


HELI_3_MILL


An assembly instruction:

Highlights
A new serrated cutting edge geometry for highly efficient rough milling.



ISCAR expands its advantageous HELI3MILL 390 LINE by introducing new inserts with serrated edges.
The new inserts, with a radii of .0315” and .1260” designated as HM390 TDCR 1505…FW-P, feature a super positive and sharp serrated cutting-edge geometry with polished rake surfaces which assure highly efficient milling for aluminum alloys and other non-ferrous materials. (ISO N grade of application)
The insert’s cutting-edge geometry splits the chips into small pieces and generates low cutting forces enabling increased feed rates for higher machining productivity.



Features
  • A sharp serrated cutting edge with a special chip former;
    - significantly improves chip evacuation
    - reduces cutting load and enables high table feed
    - reduces vibration
    - reduces heat generation
  • Suitable for High Speed Machining (HSM)
  • Intended for 90° milling cutters
  • Peripherally ground insert
  • Wide sharp-edged wiper for improved surface finish
  • Both rake and relief surfaces are polished



Applications
  • Rough to finish machining for ISO N materials
  • Milling square shoulders, slots, inclined surfaces and cavities by ramp down including ramping by helical interpolation
  • Milling with high tool overhang



Benefits
  • Productivity: Assures high metal removal rates
  • Economical: 3 helical cutting edges
  • Accuracy: milling 90º square shoulders
  • High performance when milling at low unstable conditions
  • Low power consumption allows applying the cutters on machine tools with limited power, small capacity machining centers and turn-milling machines
  • The shredded chips help in a significant reduction of the common built-up phenomena, especially when machining aluminum alloys
  • This single-sided triangular insert has three positive and serrated cutting edges intended for milling at .512” depth of cut
  • Inserts with a large corner radius produce large chips. A shred feature was added to the .1260” radius.
  • The inserts feature a wiper corner edge for high surface finish
  • New and easy to assemble as shown in the video
  • Light weight inserts for HSM where high metal removal rate (MRR) is required


Cutting recommendations
Table - Averaged Cutting data for HM390 TDCR 1505...FW-P inserts
* ISCAR material group in accordance with VDI 3323 standard
** Euronorm
For machining in unstable conditions, the recommended cutting data should be reduced by 20-30%


ISCAR’s HELI3MILL MILLSHRED Line
Serrated Cutting Edge for High Productivity!




HM390 TDCR 1505
Triangular Inserts with 3 Helical Cutting Edges for 90° Shoulder Accuracy
(1) Super positive polished rake for milling aluminum, titanium and magnesium with serrated cutting edge


Product operation guidelines
In order to provide overlapping and achieve optimal chip shredding, it is recommended to mount the HM390 TDCR 1505… FW-P insert in an alternating edge configuration on adjacent cutter flutes.



The NPA24-2021's inch pdf file: View (PDF) or Download (ZIP)
Terms of Use and Legal Disclaimer    Privacy Statement
© ISCAR Metals, Metalworking Tools (Iscarmetals.com) All Rights Reserved.