The TANGSLOT product line comprises cutters which are used very successfully in applications which require accurate grooves.
They can be used for parting as well.

  • 6.0 to 14.6 mm (0.25 – 0.57 ") width range
  • The shape of the LNET 12.. insert and the tangential clamping on the cutter results in narrow slotting cutters with a fine pitch
  • The positive, rake face chipformer reduces cutting forces and power consumption by 15%-25%. It also directs chips away from cut area, leaving the side surfaces unscratched
  • This configuration has less chattering problems and better tool life, using tangential insert type with 4 cutting edges (two right-hand and two left-hand cutting edges)
  • LNET 12... inserts are designed for general applications, especially on cast iron and steel
  • Including FDN (flanged type) and SDN (disc type) slot milling cutters

 Operation capability:

Diameter range:
Integral Cutters:
Metric: 80-250 mm
Imperial: 3-10"

Adjustable Cutters:
The adjustable cutters were designed in order to cover the range which the integral cutters do not cover and to minimize the need for special tools.
  • Diameter range: 100-200 mm
  • Cartridges: CA 06-08 , CA 08-10 , CA 10-14 right-handed and left-handed
  • Slot width range: 6-14.6 mm (.24-.57")

 Insert size: 12 mm

  • IC928
  • IC910
  • IC328

For more information about the TANGSLOT line, click here.

For more information about the SDN-LN1, click here.

For more information about the SDN-CALN12, click here.

For more information about the FDN-CALN12, click here.

For more information about the FDN-LN12, click here.

© ISCAR LTD. Manufacturer of Metalworking Tools ( All Rights Reserved