Page 22 - MILLING_CATALOG_INCH_2022_P1-P92

DRVS Rd°
ENDMILLS • SOLID CARBIDE • MULTI-MASTER

HM390 ETP-MMT DC THSZMS DCONMS
90° Endmills with a
MULTI-MASTER Threaded APMX
Adaptation Carrying HM390 LF
TPKT 1003... Triangular Inserts OAL

Designation DC APMX CICT (1) LF DCONMS THSZMS OAL DRVS (2) RMPX° (3) Lbs
HM390 ETP-D1.0-3-MMT15-10 1.000 .315 3 1.100 .960 T15 1.770 .787 1.0 .21 SR 14-562/S BLD T10/S7 SW6-SD
• For adaptation, see page 37 • For user guide, see pages 586-592
(1) Number of inserts
(2) Clamping wrench size
(3) Maximum ramping angle
For inserts, see pages: HM390 TPKT/CT 1003 (488)
For holders, see pages: MM S-A (stepped shanks) (83) • MM S-A (straight shanks) (86) • MM S-A-C# (84) • MM S-A-HSK (672)
• MM S-B (85° conical shanks) (86) • MM S-D (89° conical shanks) (87) • MM S-ER-H (89)

Shank Rd°

HM390 ETP-C#-10
90° Endmills Carrying
HM390 TPKT 1003 DC DCONMS
Triangular Inserts with 3
Helical Cutting Edges APMX
LU
LF

Designation DCONMS DC APMX CICT (1) LU LF RMPX° (2) Shank CDI (3) Lbs
HM390 ETP D25-3-L39-C3-10 1.260 .984 .315 3 1.54 2.165 2.9 CAMFIX 0 .46 SR 14-562/S BLD T10/S7 SW6-SD
• For user guide see pages 586-592
(1) Number of inserts
(2) Maximum ramping angle
(3) 1 - Slot for data chip, 0 - Without slot for data chip
For inserts, see pages: HM390 TPKT/CT 1003 (488)

DRVS THSZMS

HCE-MM DC DCONMS
Multifunction Endmills with
a MULTI-MASTER Threaded LF
Adaptation that Mounts OAL
Several Insert Geometries

Designation DC OAL LF APMX THSZMS DCONMS DRVS (1) TQ Lbs
HCE D12/.50-MMT08 .472 1.102 .787 .3189 T08 .453 .394 132.76 .03 SR 34-540 BLD T15/S7 SW6-T
HCE D16/.62-MMT10 .630 1.447 .984 .4055 T10 .598 .512 247.82 .06 SR 10503579 BLD T20/S7 SW6-T
HCE D20/.75-MMT12 .787 1.921 1.378 .5039 T12 .728 .591 247.82 .13 SR 1052964 BLD T25/S7 SW6-T
• For undercutting use HTR inserts only • The dimensions are for HCC inserts with re=.02" • Do not apply lubricant to the MULTI-MASTER threaded connection
• For adaptation options, see page 37 • For user guide, see pages 586-592
(1) Width across flats (wrench should be ordered separately)
For inserts, see pages: HCC-QF (578)
For holders, see pages: MM CAB (733) • MM GRT (shanks) (85) • MM S-A (stepped shanks) (83) • MM S-A (straight shanks) (86)
• MM S-A-C# (84) • MM S-A-HSK (672) • MM S-B (85° conical shanks) (86) • MM S-D (89° conical shanks) (87) • MM S-ER (88)
• MM S-ER-H (89) • MM TS-A (85)

20 ISCAR