Page 18 - MILLING_CATALOG_INCH_2022_P1-P92

Rd°
ENDMILLS • SOLID CARBIDE • MULTI-MASTER
HP E90AN-07 DC DCONMS
Endmills with HELIPLUS
HP ANKT 0702.. Inserts APMX
LU
LH
OAL

Designation DC CICT (1) APMX LH LDRED OAL RMPX° (2) RMPX°_2 (3) RPMX (4) DCONMS CSP (5) Shank (6) Lbs
HP E90AN-D.38-1-C.38-7C .375 1 .303 .640 .57 3.000 2.5 - 69730 .375 1 C .07 SR 34-533/L/HG T-6/51
HP E90AN-D.38-1-W.38-7 .375 1 .303 .640 .57 3.000 2.5 - 69730 .375 0 W .08 SR 34-533/L/HG T-6/51
HP E90AN-D.50-2-C.50-7C .500 2 .303 .750 .67 3.270 2.7 3.5 54310 .500 1 C .15 SR 34-533/L/HG T-6/51
HP E90AN-D.50-2-W.50-7 .500 2 .303 .750 .67 3.250 2.7 3.5 54310 .500 0 W .16 SR 34-533/L/HG T-6/51
HP E90AN-D.62-3-C.62-7C .625 3 .303 1.000 .92 3.500 3.2 6.0 45340 .625 1 C .23 SR 34-533/L/HG T-6/51
HP E90AN-D.62-3-W.625-7 .625 3 .303 1.000 .92 3.250 3.2 6.0 45340 .625 0 W 1.43 SR 34-533/L/HG T-6/51
HP E90AN-D.62-4-C.62-7C .625 4 .303 1.000 .92 3.500 3.2 6.0 45340 .625 1 C .23 SR 34-533/L/HG T-6/51
HP E90AN-D.62-4-W.625-7 .625 4 .303 1.000 .92 3.250 3.2 6.0 45340 .625 0 W .24 SR 34-533/L/HG T-6/51
HP E90AN-D.75-4-C.75-7C .750 4 .303 1.000 .93 4.000 2.4 4.5 40230 .750 1 C .41 SR 34-533/L/HG T-6/51
HP E90AN-D.75-4-W.75-7 .750 4 .303 1.000 .93 3.500 2.4 4.5 40230 .750 0 W .00 SR 34-533/L/HG T-6/51
HP E90AN-D.75-5-C.75-7C .750 5 .303 1.000 .93 4.000 2.4 4.5 40230 .750 1 C .42 SR 34-533/L/HG T-6/51
HP E90AN-D.75-5-W.75-7 .750 5 .303 1.000 .93 3.500 2.4 4.5 40230 .750 0 W .39 SR 34-533/L/HG T-6/51
HP E90AN-D1.00-5-C.75-7C 1.000 5 .303 1.000 - 4.500 2.0 3.0 33110 .750 1 C .54 SR 34-533/L/HG T-6/51
HP E90AN-D1.0-7-W.75-7 1.000 7 .303 1.000 - 3.500 2.0 3.0 33110 .750 0 W .47 SR 34-533/L/HG T-6/51
HP E90AN-D1.00-7-C.75-7C 1.000 7 .303 1.000 - 4.500 2.0 3.0 33110 .750 1 C .55 SR 34-533/L/HG T-6/51
• Insert tightening torque: 5.5 lbfxin. • For user guide see pages 586-592
(1) Number of inserts
(2) Maximum ramping angle
(3) Values only for HP ANKT 0702R12T-FF insert
(4) Maximum RPM
(5) 0 - Without coolant supply, 1 - With coolant supply
(6) C-Cylindrical, W-Weldon
For inserts, see pages: HP ANCR 0702PNFR (484) • HP ANKT 0702...-FF (485) • HP ANKT/ANCT 0702..PN-R/PNTR (484) • HP ANKW 070204PNTR (484)

DRVS THSZMS Rd°

HP E90AN-MM-07 DC DCONMS
90° Endmills with a
MULTI-MASTER Threaded APMX
Adaptation Carrying HELIPLUS LF
HP ANKT 0702.. Inserts OAL

Designation DC DCONMS CICT (1) LF OAL APMX RMPX° (2) RMPX°_2 (3) RPMX (4) THSZMS DRVS (5) Lbs
HP E90AN-D.50-2-MMT08 .500 .450 2 .650 .960 .303 2.7 3.5 54310 T08 .394 .03 SR 34-533/L/HG T-6/51
HP E90AN-D.62-3-MMT10 .625 .580 3 .750 1.210 .303 3.2 6.0 45100 T10 .512 .06 SR 34-533/L/HG T-6/51
HP E90AN-D.62-4-MMT10 .625 .580 4 .750 1.210 .303 3.2 6.0 45100 T10 .512 .05 SR 34-533/L/HG T-6/51
HP E90AN-D.75-5-MMT12 .750 .690 5 .850 1.390 .303 2.4 4.5 40230 T12 .630 .09 SR 34-533/L/HG T-6/51
• Do not apply lubricant to the MULTI-MASTER threaded connection • For adaptation see page 37 • For user guide see pages 586-592
(1) Number of inserts
(2) Maximum ramping angle
(3) Values only for HP ANKT 0702R12T-FF insert
(4) Maximum RPM
(5) Width across flats (wrench should be ordered separately)
For inserts, see pages: HP ANCR 0702PNFR (484) • HP ANKT 0702...-FF (485) • HP ANKT/ANCT 0702..PN-R/PNTR (484) • HP ANKW 070204PNTR (484)
For holders, see pages: MM CAB (733) • MM GRT (shanks) (85) • MM S-A (stepped shanks) (83) • MM S-A (straight shanks) (86)
• MM S-A-C# (84) • MM S-A-HSK (672) • MM S-B (85° conical shanks) (86) • MM S-D (89° conical shanks) (87) • MM S-ER (88)
• MM S-ER-H (89) • MM TS-A (85)

16 ISCAR