Page 16 - MILLING_CATALOG_INCH_2022_P1-P92
P. 16
DRVS
ENDMILLS • SOLID CARBIDE • MULTI-MASTER
HM390 ETP-MM-05 DC THSZMS DCONMS Rd°
90° Endmills with a
MULTI-MASTER Threaded APMX
Adaptation Carrying HM390 LF
TPKT 0502... Triangular Inserts OAL
Designation DC APMX CICT (1) LF DCONMS THSZMS OAL DRVS (2) RMPX° (3) Lbs
HM390 ETPD.50-03-MMT08-05 .500 .1380 3 .650 .480 T08 .950 .394 1.5 .20
HM390 ETPD.62-04-MMT10-05 .625 .1380 4 .740 .610 T10 1.200 .512 1.5 .01
• Insert tightening torque 4.42 lbf*in • For adaptation, see page 37 • For user guide, see pages 586-592
(1) Number of inserts
(2) Clamping wrench size
(3) Maximum ramping angle
For inserts, see pages: HM390 TPKT/CT 0502 (487)
For holders, see pages: MM CAB (733) • MM CAB-T-T (90) • MM GRT (shanks) (85) • MM S-A (stepped shanks) (83) • MM S-A (straight shanks) (86)
• MM S-A-C# (84) • MM S-A-HSK (672) • MM S-B (85° conical shanks) (86) • MM S-D (89° conical shanks) (87) • MM S-ER (88)
• MM S-ER-H (89) • MM TS-A (85)
Spare Parts
Designation
HM390 ETP-MM-05 TS 18041I/HG T-6IP/51
T290 ELN-05
Endmills Carrying Tangentially DC DCONMS
Clamped Inserts
APMX
LH
OAL
Designation DC CICT (1) OAL LH APMX DCONMS Shank (2) Lbs
T290 ELN D.38-02-C.38-05 .375 2 3.000 .790 .197 .375 C .07 SR 10503833-S T-7/51
T290 ELN D.50-02-C.50-05 .500 2 3.250 .790 .197 .500 C .15 SR 10503833 T-7/51
T290 ELN D.50-03-C.50-05 .500 3 3.250 .790 .197 .500 C .15 SR 10503833 T-7/51
T290 ELN D.62-04-C.62-05 .625 4 3.110 1.000 .197 .625 C .22 SR 10503833 T-7/51
T290 ELN D.62-05-C.62-05 .625 5 3.110 1.000 .197 .625 C .22 SR 10503833 T-7/51
• For user guide, see pages 586-592
(1) Number of inserts
(2) C-Cylindrical
For inserts, see pages: T290 LNMT/LNHT 0502 (516)
APMX DRVS
T290 ELN-MM-05 DC THSZMS DCONMS
Endmills with a
MULTI-MASTER Adaptation LF
Carrying Tangentially OAL
Clamped Inserts
Designation DC CICT (1) APMX DCONMS THSZMS LF OAL DRVS (2) Lbs
T290 ELN D.38-02-MMT06-05 .375 2 .197 .340 T06 .520 .790 .315 .01 SR 10503833-S T-7/51
T290 ELN D.50-03-MMT08-05 .500 3 .197 .450 T08 .630 .940 .394 .03 SR 10503833 T-7/51
• Do not apply lubricant to the MULTI-MASTER threaded connection • For adaptation options, see page 37 • For user guide, see pages 586-592
(1) Number of inserts
(2) Width across flats (wrench should be ordered separately)
For inserts, see pages: T290 LNMT/LNHT 0502 (516)
For holders, see pages: MM CAB (733) • MM S-A (stepped shanks) (83) • MM S-A (straight shanks) (86) • MM S-A-C# (84) • MM S-A-HSK (672)
• MM S-B (85° conical shanks) (86) • MM S-D (89° conical shanks) (87) • MM S-ER (88) • MM S-ER-H (89) • MM TS-A (85)
14 ISCAR