Page 15 - MILLING_CATALOG_INCH_2022_P1-P92

Rd°
HM390 ETP-04
90° Small Diameter DC DCONMS
Endmills Carrying
HM390 TPKR 0401
Triangular Inserts with 3 APMX LU
Helical Cutting Edges LH
OAL
Lbs
Designation DC APMX CICT (1) OAL LU LH DCONMS Shank (2) RMPX° (3)
HM390 ETP D.31-2-C.31-04 .313 .1200 2 2.500 .3740 .470 .313 C 3.0 .05
HM390 ETP D.38-3-C.38-04 .375 .1200 3 3.000 .4685 .560 .375 C 2.6 .09
• Tightening torque 4 lbfx*in
(1) Number of inserts
(2) C-Cylindrical
(3) Maximum ramping angle
For inserts, see pages: HM390 TPKR 0401 (486)

Spare Parts ENDMILLS • SOLID CARBIDE • MULTI-MASTER

Designation
HM390 ETP-04 SR M2X0.4-3 T6 T-6/5 MAGNET 3X3
DRVS Rd°

HM390 ETP-MM-04 DC THSZMS DCONMS
90° Endmills with a
MULTI-MASTER Threaded APMX
Adaptation Carrying HM390 LF
TPKR 0401... Triangular Inserts OAL

Designation DC APMX CICT (1) LF DCONMS THSZMS OAL DRVS (2) RMPX° (3) Lbs
HM390 ETP D.31-2-MMT05-04 .313 .1200 2 .380 .300 T05 .850 .217 3.0 .01
HM390 ETP D.38-3-MMT06-04 .375 .1200 3 .500 .360 T06 .740 .315 2.5 .02
• Tightening torque 4 lbf*in • For adaptation, see page 37 • For user guide, see pages 586-592
(1) Number of inserts
(2) Clamping wrench size
(3) Maximum ramping angle
For inserts, see pages: HM390 TPKR 0401 (486)
For holders, see pages: MM CAB (733) • MM CAB-T-T (90) • MM GRT (shanks) (85) • MM S-A (stepped shanks) (83) • MM S-A (straight shanks) (86)
• MM S-A-C# (84) • MM S-A-HSK (672) • MM S-B (85° conical shanks) (86) • MM S-D (89° conical shanks) (87) • MM S-ER (88)
• MM S-ER-H (89) • MM TS-A (85)

Spare Parts
Designation
HM390 ETP-MM-04 SR M2X0.4-3 T6 T-6/5 MAGNET 3X3
Rd°
HM390 ETP-05
90° Endmills Carrying DC DCONMS
HM390 TPKT 0502
Triangular Inserts with 3
Helical Cutting Edges APMX
LH
OAL

Designation DC APMX CICT (1) OAL LH DCONMS Shank (2) RMPX° (3) Lbs
HM390 ETPD.50-03-C.50-05C .500 .1380 3 3.500 .750 .500 C 1.5 .17
HM390 ETPD.62-04-C.62-05C .625 .1380 4 3.500 1.000 .625 C 1.5 .25
• Tightening torque 4.42 lbf*in • For user guide, see pages 586-592
(1) Number of inserts
(2) C-Cylindrical
(3) Maximum ramping angle
For inserts, see pages: HM390 TPKT/CT 0502 (487)

Spare Parts
Designation
HM390 ETP-05 TS 18041I/HG T-6IP/51

13