Page 13 - MILLING_CATALOG_INCH_2022_P1-P92

DCONMS
E90SO-04 A B
Endmills Carrying Square
Inserts for Shouldering and OAL Rd°
Fast Feed Milling Applications LU APMX_2

APMX 15˚
DC DC_2
DCX_2
Designation DC APMX DC_2 DCX_2 APMX_2 LU OAL DCONMS Shank (1) CICT (2) RMPX° (3) MIID (4) MIID_2 (5) Lbs
E90SO D.38-02-C.38-04-C .375 .1380 .134 .382 .0200 .7500 3.000 .375 C 2 6.0 SOMT 040204 PNTR SOMT 040208 PNR-FF .07
E90SO D.50-03-C.50-04-C .500 .1380 .259 .506 .0200 .7500 3.500 .500 C 3 3.0 SOMT 040204 PNTR SOMT 040208 PNR-FF .17
E90SO D.62-05-C.62-04-C .625 .1380 .384 .631 .0200 1.0000 3.500 .625 C 5 2.0 SOMT 040204 PNTR SOMT 040208 PNR-FF .13
E90SO D.75-06-W.75-04-C .750 .1380 .509 .756 .0200 1.0000 3.500 .750 W 6 1.0 SOMT 040204 PNTR SOMT 040208 PNR-FF .44
• A - with SOMT/CT 0402 insert • B - with SOMT 0402-FF insert • Tightening torque 4.4 lbf*in
(1) When using SOMT 0402-FF inserts, the seat pocket is to be modified
(2) C-Cylindrical, W-Weldon
(3) Number of inserts
(4) Maximum ramping angle - valid only with SOMT 040208 PNR-FF insert
(5) Master insert identification ENDMILLS • SOLID CARBIDE • MULTI-MASTER
For inserts, see pages: SOMT 0402-FF (541) • SOMT/CT 0402 (540)

Spare Parts
Designation
E90SO-04 TS 18041I/HG T-6IP/51

DCONMS
THSZMS B
A
E90SO-MM-04 OAL Rd°
Endmills with a MULTI-MASTER LF
Connection Carrying Inserts 15˚
for Shouldering and Fast DC APMX DC_2 APMX_2
Feed Applications DCX_2

Designation DC APMX DC_2 DCX_2 APMX_2 LF OAL CICT DCONMS THSZMS DRVS RMPX° (3) MIID (4) MIID_2 (5) Lbs
(1)
(2)
E90SO D.38-02-MMT06-04-C .375 .1380 .134 .382 .0200 .526 .770 2 .361 T06 .315 6.0 SOMT 040204 PNTR SOMT 040208 PNR-FF .01
E90SO D.50-03-MMT08-04-C .500 .1380 .259 .506 .0200 .630 .940 3 .450 T08 .394 3.0 SOMT 040204 PNTR SOMT 040208 PNR-FF .03
E90SO D.62-05-MMT10-04-C .625 .1380 .384 .631 .0200 .750 1.200 5 .600 T10 .512 2.0 SOMT 040204 PNTR SOMT 040208 PNR-FF .06
E90SO D.75-06-MMT12-04-C .750 .1380 .509 .756 .0200 .980 1.500 6 .730 T12 .630 1.0 SOMT 040204 PNTR SOMT 040208 PNR-FF .11
• A - with SOMT/CT 0402 insert • B - with SOMT 0402-FF insert (pocket seat must be modified) • Tightening torque 4.4 lbf*in
(1) Number of inserts
(2) Torque key size
(3) Maximum ramping angle - valid only with SOMT 040208 PNR-FF insert
(4) Master insert identification
(5) Master insert identification 2
For inserts, see pages: SOMT 0402-FF (541) • SOMT/CT 0402 (540)
For holders, see pages: MM CAB (733) • MM CAB-T-T (90) • MM GRT (shanks) (85) • MM S-A (stepped shanks) (83) • MM S-A (straight shanks) (86)
• MM S-A-C# (84) • MM S-A-HSK (672) • MM S-B (85° conical shanks) (86) • MM S-D (89° conical shanks) (87) • MM S-ER (88)
• MM S-ER-H (89) • MM TS-A (85)

Spare Parts

Designation
E90SO-MM-04 TS 18041I/HG T-6IP/51

11