Page 18 - FAST_FEED_MILL_Brochure_INCH_2022
P. 18
DCX DC THSZMS DCONMS
FFX4 ED-MM Rd°
Endmills with MULTI-MASTER
Adaptation Carrying Small "Bone APMX 17˚ DRVS
Shaped" Inserts with 4 Cutting LF
Edges for Fast Feed Milling OAL
(6)
(2)
(4)
(5)
Designation DCX (1) DC CICT APMX AE THSZMS LF OAL DCONMS RMPX° MDN MDX DRVS (7) MIID (8) TQ (9) Rg (10) Lbs
(3)
FFX4 ED16/.63-2-MMT10-04 .630 .339 2 .0315 .146 T10 .787 1.250 .598 4.3 .969 1.220 .512 FFX4 XNMU 040310T .04 .071 .05
FFX4 ED20/.78-3-MMT12-04 .787 .496 3 .0315 .146 T12 .984 1.508 .740 2.7 1.283 1.535 .591 FFX4 XNMU 040310T .04 .071 .10
FFX4 ED25/.98-4-MMT15-04 .984 .693 4 .0315 .146 T15 1.181 1.850 .945 1.8 1.677 1.929 .748 FFX4 XNMU 040310T .04 .071 .32
• To generate a straight surface without cusps, the width of cut must not exceed DC
(1) Cutting diameter maximum
(2) Number of inserts
(3) Maximum plunging width
(4) Maximum ramping angle
(5) Machinable diameter minimum for interpolation
(6) Machinable diameter maximum for interpolation
(7) Torque key size
(8) Master insert identification
(9) Recommended tightening torque (lbf*in) for insert screw
(10) Radius for programming
Spare Parts
Designation
FFX4 ED-MM SR M2.5X6-T7-60 T-7/51
OAL
LF
FFX4 ED-M DCX DC THSZMS DCONMS Rd°
Endmills with FLEXFIT Adaptation
Carrying Small "Bone Shaped"
Inserts with 4 Cutting Edges APMX 17˚ DRVS
for Fast Feed Milling
Designation DCX (1) DC CICT (2) APMX AE THSZMS LF OAL DCONMS RMPX° MDN MDX (6) DRVS (7) Rg (8) MIID (9) TQ (10) TQ_3 (11) Lbs
(3)
(5)
(4)
FFX4 XNMU
FFX4 ED20/.78-3-M10-04 .787 .496 3 .0315 .146 M10 .984 1.772 .709 2.7 1.283 1.535 .591 .071 .04 260 .09
040310T
FFX4 ED25/.98-4-M12-04 .984 .693 4 .0315 .146 M12 1.181 2.047 .827 1.8 1.677 1.929 .748 .071 FFX4 XNMU .04 295 .18
040310T
FFX4 XNMU
FFX4 ED32/1.26-5-M16-04 1.260 .969 5 .0315 .146 M16 1.378 2.362 1.142 1.2 2.228 2.480 1.063 .071 .04 355 .40
040310T
FFX4 XNMU
FFX4 ED35/1.38-5-M16-04 1.378 1.087 5 .0315 .146 M16 1.378 2.362 1.142 1.1 2.465 2.717 .984 .071 .04 355 .44
040310T
FFX4 XNMU
FFX4 ED42/1.65-6-M16-04 1.654 1.362 6 .0315 .146 M16 1.575 2.559 1.142 .8 3.016 3.268 .984 .071 040310T .04 355 .66
• To generate a straight surface without cusps, the width of cut must not exceed DC • When mounting items with FLEXFIT threaded adaptation to their holders, the mating
surfaces and threaded areas must be thoroughly cleaned. Apply appropriate tightening torque to eliminate a gap between the mating faces. Estimated torque values are
specified in the TQ_3 parameter
(1) Cutting diameter maximum
(2) Number of inserts
(3) Maximum plunging width
(4) Maximum ramping angle
(5) Machinable diameter minimum for interpolation
(6) Machinable diameter maximum for interpolation
(7) Torque key size
(8) Radius for programming
(9) Master insert identification
(10) Recommended tightening torque (lbf*in) for insert screw
(11) Tool tightening torque (lbfxin)
Spare Parts
Designation
FFX4 ED-M SR M2.5X6-T7-60 T-7/51
18 FAST FEED MILLING