Page 5 - MILLING_CATALOG_INCH_2022_P361-P592

MM TS077-N...
MM TS-N .590 THSZMS CW CHWx45°
.177
Interchangeable Solid Carbide
T-Slot Milling Heads .315 DC CDX

RE .394 CW

Dimensions Tough 1 Hard

IC328 IC928 IC908
Designation DC DCTOLL CW NOF (1) THSZMS CDX (2) RE CHW
MM TS077-N07A-4T05 .303 -0.0020 .028 4 T05 .047 .0079 - MM KEY 6X4* • SLOTTING & SLITTING CUTTERS
MM TS077-N08A-4T05 .303 -0.0020 .031 4 T05 .047 .0079 - MM KEY 6X4* •
MM TS077-N09A-4T05 .303 -0.0020 .035 4 T05 .047 .0079 - MM KEY 6X4* •
MM TS077-N10A-4T05 .303 -0.0020 .039 4 T05 .047 .0079 - MM KEY 6X4* •
MM TS077-N15A-4T05 .303 -0.0020 .059 4 T05 .047 .0079 - MM KEY 6X4* •
MM TS077-N20A-4T05 .303 -0.0020 .079 4 T05 .047 .0079 - MM KEY 6X4* •
MM TS105-N20D-06T04 .413 -0.0020 .079 6 T04 .079 .0157 - T-15/3* •
MM TS.500-N062P-06T05 .500 -0.0020 .062 6 T05 .089 - .006 T-20/3* • •
MM TS.500-N078P-06T05 .500 -0.0020 .078 6 T05 .089 - .006 T-20/3* • •
MM TS135-N20P-06T05 .531 -0.0020 .079 6 T05 .104 - .008 T-20/3* • •
MM TS135-N25P-06T05 .531 -0.0020 .098 6 T05 .104 - .008 T-20/3* • •
• For shanks, see pages 83-90 • For tightening torques and clamping instructions, see pages 91-92 • Do not apply lubricant to the threaded connection
• For user guide, see pages 410-416
(1) Number of flutes
(2) Cutting depth maximum
* Optional, to be ordered separately

MM TS-H THSZMS RE CW
Interchangeable Solid Carbide
T-Slot Milling Heads with DC CDX
Different Corner Radii

CW

Dimensions Tough 1 Hard

IC328 IC908
Designation DC DCTOLL CW CDX (1) NOF (2) RE THSZMS
MM TS.500-H125D-06T05 .500 -0.0020 .125 .088 6 .0150 T05 T-20/3* • •
MM TS.625-H056D-06T06 .625 -0.0020 .056 .125 6 .0160 T06 T-20/3* • •
MM TS.625-H063D-06T06 .625 -0.0020 .063 .125 6 .0160 T06 T-20/3* • •
MM TS.625-H068D-06T06 .625 -0.0020 .068 .125 6 .0160 T06 T-20/3* • •
MM TS.625-H078D-06T06 .625 -0.0020 .078 .125 6 .0160 T06 T-20/3* • •
MM TS.625-H086D-06T06 .625 -0.0020 .086 .125 6 .0160 T06 T-20/3* • •
MM TS.625-H105D-06T06 .625 -0.0020 .105 .125 6 .0160 T06 T-25/3* • •
MM TS.625-H125D-06T06 .625 -0.0020 .125 .125 6 .0160 T06 T-25/3* • •
MM TS.625-H156D-06T06 .625 -0.0020 .156 .125 6 .0160 T06 T-25/3* • •
MM TS.750-H156D-06T08 .750 -0.0020 .156 .120 6 .0160 T08 T-30/3 L* • •
MM TS.750-H187D-06T08 .750 -0.0020 .187 .120 6 .0160 T08 T-30/3 L* • •
MM TS.750-H250D-06T08 .750 -0.0020 .250 .120 6 .0160 T08 T-30/3 L* • •
MM TS.875-H187D-06T08 .875 -0.0020 .187 .190 6 .0150 T08 T-40/3 L* • •
MM TS.875-H250D-06T08 .875 -0.0020 .250 .190 6 .0150 T08 T-40/3 L* • •
MM TS.875-H312D-06T08 .875 -0.0020 .312 .190 6 .0150 T08 T-40/3 L* • •
MM TS1.00-H187D-06T10 1.000 -0.0020 .187 .177 6 .0150 T10 T-50/3 L* • •
MM TS1.00-H250D-06T10 1.000 -0.0020 .250 .177 6 .0150 T10 T-50/3 L* • •
MM TS1.00-H375D-06T10 1.000 -0.0020 .375 .177 6 .0150 T10 T-50/3 L* • •
• Inserts in .197" and wider feature chip splitting edges • For tightening torques and clamping instructions, see pages 91-92
• Do not apply lubricant to the threaded connection • For shanks, see pages 83-90 • For user guide, see pages 410-416
(1) Cutting depth maximum
(2) Number of flutes
* Optional, to be ordered separately

365