Page 12 - Turning_catalog_INCH_2022_45_P509-690
P. 12
PARTING DGFS a° LH CUTDIA H WB
OAL
CWN-CWN
Blades for Multi-Spindle
Machines, Replacement for
WB_2
HSS and Brazed Tools
Designation H CWN (7) CWX (8) CUTDIA WB WB_2 OAL LH a°
DGFS 0-12-2 (1) .500 .075 .098 1.260 .063 .126 4.331 1.260 0 EDG 33B*
DGFS 0-17-2 (2) .685 .075 .098 1.378 .063 .126 4.331 1.260 0 EDG 33B*
DGFS 0-17-3 (2) .685 .118 .125 2.362 .094 .126 4.331 1.260 0 EDG 33B*
DGFS 5-17-2 (3) .685 .075 .098 1.378 .063 .126 4.331 1.260 5 EDG 33B*
DGFS 5-17-3 (3) .685 .118 .125 2.362 .094 .126 4.331 1.260 5 EDG 33B*
DGFS 5-17-4 (3) .685 .157 .157 2.362 .126 .126 4.331 1.260 5 EDG 33B*
DGFS 5-22-2 (4) .874 .075 .098 1.968 .063 .126 5.906 1.260 5 EDG 33B*
DGFS 5-22-3 (5) .874 .118 .125 2.953 .094 .126 5.906 1.260 5 EDG 33B*
DGFS 5-22-4 (5) .874 .157 .157 3.150 .126 .126 5.906 1.260 5 EDG 33B*
DGFS 5-24-3 .937 .118 .125 3.150 .094 .126 5.906 1.260 5 EDG 33B*
DGFS 5-28-2 (6) 1.122 .075 .098 2.559 .063 .126 5.906 1.260 5 EDG 33B*
DGFS 5-28-4 (6) 1.122 .157 .157 3.937 .126 .126 5.906 1.260 5 EDG 33B*
• DG..1.0 insert can be mounted into pocket sizes 2 and 3. in which case the pocket width has to be modified -see page 531
• For user guide, see pages 594-603
(1) Toolholder assembly X18-1,46,47-WT,160-CL,354-CL,701-ACL,702,702-CL,703,703-CL,704,704-CL,6921,6925
(2) Toolholder assembly E-7,47,102-CL,103-CL,161-A-CL,162-A-CL
(3) Toolholder assembly 226,226-CL,275,275-CL,276-CL,361-CL,431,630,707-A,707-A-CL
(4) Toolholder assembly 100-CL,274,277,277-CL,274-CL,370,383-CL, 6722,6754,6755,6854,6855,6922,51,51-CL,353-CL,167,370-CL
(5) Toolholder assembly 100-CL,274,277,277-CL,274-CL,370,383-CL, 6722,6754,6755,6854,6855,51,51-CL,353-CL,167,370-CL
(6) Toolholder assembly 278,278-CL,279,279-CL,280,280-CL,281,281-CL,375-CL,359-CL,372-CL,A6120,52,52-CL
(7) Minimum cutting width • For DG: 1.0 insert - modify holder
(8) Maximum cutting width
* Optional, should be ordered separately
For inserts, see pages: DGN-LF/LFT (537) • GRIPA (278) • GRIPA (full radius) (279) • DGN/DGNC/DGNM-C (533) • DGR/L-C DGRC/LC-C (534)
• DGN/DGNM-J/JS/JT (535) • DGR/L-J/JS (536) • DGN-P (539) • DGN-UT/UA (539) • DGN-WP (540) • DGN-Z (538) • DGR-P (540) • DGR-WP (541)
• DGR-Z/ZS (538) • GRIP (277) • GRIP (full radius) (278)
520 ISCAR