Page 13 - Turning_catalog_INCH_2022_45_P509-690
P. 13
CDX
DGFHR/L-B-D..(R/L) CUTDIA DGFHL-B-D50R DGFHR-B-D50L CWN-CWX
Reinforced Type Blades
with Screw Clamping OAH H HF CUTDIA PARTING
HBH WB
1.44 DGFHL-B-D50 DGFHR-B-D50 WB_2
OAL
Designation H (4) CWN (5) CWX (6) WB WB_2 OAL OAH HF HBH CDX (7) CUTDIA (8) Insert
DGFHR/L 26B-2D50 (1) 1.024 .075 .098 .063 .315 4.331 1.33 .843 .14 .709 1.968 DG. 1.../DG. 2.. SR M4X20 DIN912 HW 3.0
DGFHL 26B-2D50R (2) 1.024 .075 .098 .063 .315 4.331 1.24 .843 .15 .709 1.968 DG. 1.../DG. 2.. SR M4X20 DIN912 HW 3.0
DGFHR 26B-2D50L (2) 1.024 .075 .098 .063 .315 4.331 1.24 .843 .15 .709 1.968 DG. 1.../DG. 2.. SR M4X20 DIN912 HW 3.0
DGFHR/L 26B-3D50 (1) 1.024 .118 .125 .094 .315 4.331 1.24 .843 .15 .709 1.968 DG. 1.../DG. 3.. SR M4X20 DIN912 HW 3.0
DGFHL 26B-3D50R (2) 1.024 .118 .125 .094 .315 4.331 1.24 .843 .15 .709 1.968 DG. 1.../DG. 3.. SR M4X20 DIN912 HW 3.0
DGFHR 26B-3D50L (2) 1.024 .118 .125 .094 .315 4.331 1.24 .843 .15 .709 1.968 DG. 1.../DG. 3.. SR M4X20 DIN912 HW 3.0
DGFHR/L 32B-2D50 (3) 1.260 .075 .098 .063 .315 4.724 1.24 .976 - .709 1.968 DG. 1.../DG. 2.. SR M4X20 DIN912 HW 3.0
DGFHL 32B-2D50R (2) 1.260 .075 .098 .063 .315 4.724 1.24 .976 - .709 1.968 DG. 1.../DG. 2.. SR M4X20 DIN912 HW 3.0
DGFHR 32B-2D50L (2) 1.260 .075 .098 .063 .315 4.724 1.24 .976 - .709 1.968 DG. 1.../DG. 2.. SR M4X20 DIN912 HW 3.0
DGFHR/L 32B-3D50 (3) 1.260 .118 .125 .094 .315 4.724 1.24 .976 - .709 1.968 DG. 1.../DG. 3.. SR M4X20 DIN912 HW 3.0
DGFHL 32B-3D50R (2) 1.260 .118 .125 .094 .315 4.724 1.24 .976 - .709 1.968 DG. 1.../DG. 3.. SR M4X20 DIN912 HW 3.0
DGFHR 32B-3D50L (2) 1.260 .118 .125 .094 .315 4.724 1.24 .976 - .709 1.968 DG. 1.../DG. 3.. SR M4X20 DIN912 HW 3.0
• Insert (double sided) limit is CDX=.709", If deeper penetration is required the insert should be changed to a single-ended insert DGNM type.
• DG..1.0 insert can be mounted into pocket sizes 2 and 3, in which case the pocket width has to be modified-see page 531
• For user guide, see pages 594-603
(1) For Traub machines, model TNC 30, TNM 28, TNS 26/30/42/112, TNA 300, TNK 260
(2) For Tornos Bechler, Emco 2000/20, 2000/26 machines
(3) For TRAUB machines, model TNC 42/65, TNM 42/65, TNS 42/60/65, TNA 300/400
(4) Mounted on all ISCAR standard blocks.
(5) Minimum cutting width • For DG: 1.0 insert - modify holder
(6) Maximum cutting width
(7) Cutting depth maximum
(8) The specified limit refers to the tool.
For inserts, see pages: DGN-LF/LFT (537) • DGN-MF (537) • DGN-P (539) • DGN-UT/UA (539) • DGN-WP (540) • DGN-Z (538) • DGN/DGNC/DGNM-C (533)
• DGN/DGNM-J/JS/JT (535) • DGR-P (540) • DGR-WP (541) • DGR-Z/ZS (538) • DGR/L-C DGRC/LC-C (534) • DGR/L-J/JS (536)
For holders, see pages: C#-TBK-R/L (677) • HSK A-WH-TBK-R/L (688) • SGTBF (673) • SGTBR/L (673) • SGTBU/SGTBN (672) • UBHCR/L (673)
1.49
DGFHL-26B-TR-D A CUTDIA
Reinforced Blades with H HF OAH 1.24 DGFHL..B-..TR-D..
Screw Clamping for Traub
and Index Machines WB DGFHL..B DGFHL..B A 2.12 max .138 CWN-CWX
-..TR-D-R -..TR-D OAL
WB_2
Designation H (2) CWN (3) CWX (4) WB WB_2 OAL OAH HF CUTDIA (5) Insert
DGFHL 26B-1.5TR-D20 (1) 1.024 .039 .059 .047 .311 4.331 1.10 .843 .787 DG. 1.../DG. 15.. SR M4X20 DIN912 HW 3.0
DGFHL 26B-2TR-D36 1.024 .075 (6) .098 .063 .311 4.331 1.10 .843 1.417 DG. 1.../DG. 2.. SR M5X20-01172 HW 3.0
DGFHL 26B-2TR-D36R 1.024 .075 .098 .063 .311 4.331 1.10 .843 1.417 DG. 1.../DG. 2.. SR M4X20 DIN912 HW 3.0
(6)
DGFHL 26B-3TR-D36 1.024 .118 .125 .094 .311 4.331 1.10 .843 1.417 DG. 1.../DG. 3.. SR M4X20 DIN912 HW 3.0
(6)
DGFHL 26B-3TR-D36R 1.024 .118 .125 .094 .311 4.331 1.10 .843 1.417 DG. 1.../DG. 3.. SR M5X20-01172 HW 3.0
(6)
• Insert limit is Tmax=.709". If deeper penetration is required, the insert should be modified into single-ended by the user
• DG..1.0 insert can be mounted into pocket sizes 2 and 3, in which case the pocket width has to be modified - see page 531
• For user guide, see pages 594-603
(1) Do not use DG.. 1.4 on this tool!
(2) Mounted on all ISCAR standard blocks
(3) Minimum cutting width
(4) Maximum cutting width
(5) The specified limit refers to the tool
(6) For DG: 1.0 insert - modify holder.
For inserts, see pages: DGN-LF/LFT (537) • DGN-P (539) • DGN-UT/UA (539) • DGN-WP (540) • DGN-Z (538) • DGN/DGNC/DGNM-C (533)
• DGN/DGNM-J/JS/JT (535) • DGR-Z/ZS (538) • DGR/L-C DGRC/LC-C (534) • DGR/L-J/JS (536)
521
