NPA 26/2021 INCH

    New Fast Feed Milling Tools Expand LOGIQ-4-FEED Family


    Following the successful introduction in 2018 and growing market demand, ISCAR is expanding the LOGIQ-4-FEED family of fast feed milling cutters by introducing new tools that carry narrow “bone shape” larger sized (08) inserts.

    Milling Cutters
    The new fast feed milling tools have an indexable shell mill design configuration and are available in a diameter range of 2.0” to 5.0”, which ensures a maximum .0787” depth of cut.

    Tool features:
    • The cutter carries double-sided inserts with 4 cutting edges
    • Maximum .0787” depth of cut
    • 18° cutting edge angle
    • Positive rake angle
    • Ramping down capabilities
    • Coolant holes directed to each individual cutting edge with coolant supply through the cutter body

    FFX4 XNMU 080620…Insert Features
    • Double-sided insert with 4 cutting edges
    • Positive rake angle for smooth and easy cutting
    • Reinforced insert corner for improved performance when milling near a wall
    • Available with two types of cutting geometries (T/HP) for optimal machining of different materials

    Insert FFX4 XNMU 080620T is for steel, ferritic and martensitic stainless steel, cast iron.

    and hardened steel (ISO P, K and H application groups). Insert FFX4 XNMU 080620HP is for austenitic stainless steel and high-temperature alloys (ISO M and S application groups).

    Tool Advantages
    • Covers a wide range of applications
    • Suitable for machining a wide range of workpiece materials
    • An optimal solution for rough milling operations
    • Ensures high metal removal rates
    • Economical solution

    FFX4 FD
    Face Mills Carrying "Bone Shape" Inserts with 4 Cutting Edges for Fast Feed Milling
    • To generate a straight surface without cusps, the width of cut must not exceed DC
    (1) Cutting diameter maximum
    (2) Number of inserts
    (3) Maximum plunging width
    (4) Ramping angle maximum
    (5) Machinable diameter minimum for interpolation
    (6) Machinable diameter maximum for interpolation
    (7) Radius for programming
    (8) Master insert identification

    FFX4 XNMU-08
    "Bone Shape" Inserts with 4 Cutting Edges for Fast Feed Milling
    • For side plunging, the initial cutting feed is .004 inch/t
    • HP- for austenitic stainless steel and high temperature alloys
    • T- for steel, ferritic and martensitic stainless steel, cast iron and hardened steel .

    Table - Averaged Cutting data for FFX4 fast feed cutters-Size 08
    * ISCAR material group in accordance with VDI 3323 standard
    ** Quenched and tempered
    For machining in unstable conditions, the recommended cutting data should be reduced by 20-30%

    The NPA26 inch-2021's pdf file: View (PDF) or Download (ZIP)
    © ISCAR LTD. Manufacturer of Metalworking Tools (Iscar.com) All Rights Reserved